wye does my helve hammer not work

[Pepperorange]

i built a helve hammer and it is hammering but not changing anything. Do someone have a solution?

[LadyWYT]

Judging by the HUD, the wind seems to be strong enough to power the hammer, and if it was hammering then your windmill should be big enough to power it. The ingot still looks like it's hot enough, judging by the color, but you might check it anyway just to be sure. Otherwise, I might try disconnecting and reconnecting the hammer to the windmill. Sometimes the game derps out a bit and doing that will start things going again.

Since you are using mods though, it could be a mod issue, depending on which mods you are using.

[Pepperorange]

My ingot is hot enough so it is a mod problem but which one tweak mods i have are AccessibilityTweaks_v4.0.0,DanaTweaks-v3.6.0,xinvtweaks_v1.8.1

[LadyWYT]

If it's a mod problem the easiest way to figure it out if there's no obvious culprit, is to disable all mods and verify that the vanilla game is working as intended(make sure you're testing on a world specifically for testing, and not your cherished world!). Once you've done that, then it's just a matter of turning mods back on one by one and testing as you do so until the problem reoccurs. At that point, you know which mod to disable, and which mod author to report the problem to so it can be fixed.

As for removing mods from a world already being played, it's usually safe, but it depends heavily on what the mod does as well. Best to make a backup of the world before you load it, just in case something goes wrong.