kaklaw Posted April 17, 2020 Report Share Posted April 17, 2020 Hi there, i have some probleme here, i try to make helvehammer working on but when everything is set up it loose power and it seem it cant make anything from ingot. I have try tall windmill, small one, always with rank 3 palm, nothing wotk. As soon as i connect windmill to the hammer it slow down to stop. Can you help me ? Link to comment Share on other sites More sharing options...
Maxwell Ellington Posted April 17, 2020 Report Share Posted April 17, 2020 If the windmill and connected axles move, but only stop when connected to the helvehammer, this means you set it up correctly but don't have enough wind power. Remember that the axles are considered as part of the load, so avoid a tall windmill and build one at high altitudes if possible. Also, two windmills can be connected to the helvehammer, one on each side. It may take two to get the machine working, I have two on mine and it only works effectively on windy days. Link to comment Share on other sites More sharing options...
Maxwell Ellington Posted April 17, 2020 Report Share Posted April 17, 2020 Also you I needed 8 sails total. Yours can probably run the quern though. Link to comment Share on other sites More sharing options...
TallSloGuy Posted April 19, 2020 Report Share Posted April 19, 2020 I think the helve hammer can only make plates and hammer out iron blooms into ingots. If your trying to make a tool head just use the regular hammers. Link to comment Share on other sites More sharing options...
Recommended Posts