Jump to content

How to fix containers placement?


Go to solution Solved by Never Jhonsen,

Recommended Posts

Posted

Hi,

I am building my first house and faced an error with my basement, specifically with a containers location.
When placing the container on the floor it stuck in the air, I was building the basement's floor from wooden slabs and the surface (floor above) also from wooden slabs, but from different tree.

Is there any fix for that? I spent some already some time on this and don't want to start from the scratch :/

obraz_2025-05-15_150315942.png

obraz_2025-05-15_150346909.png

  • Solution
Posted (edited)
2 hours ago, LordGwynbleidd said:

I was building the basement's floor from wooden slabs

It sounds like your floor is made with slabs on the bottom half of the block.

The way to fix it would be to raise the floor 1/2 a block, place them in the upper half of the space. After you fix the floor, I think you will still need to re-place the baskets; since they did not get set on a flat surface, they attached themselves to the wall, and if I'm remembering correctly that has them slightly above the block below them.

Edited by Never Jhonsen
I mis spoke 😬
  • Like 1
Posted
2 hours ago, Never Jhonsen said:

It sounds like your floor is made with slabs on the bottom half of the block.

This is precisely the problem  The torch and stairs indicate where the full blocks are and the floor is very much a slab on the bottom half of the block space.

Posted
On 5/15/2025 at 3:25 PM, Never Jhonsen said:

It sounds like your floor is made with slabs on the bottom half of the block.

The way to fix it would be to raise the floor 1/2 a block, place them in the upper half of the space. After you fix the floor, I think you will still need to re-place the baskets; since they did not get set on a flat surface, they attached themselves to the wall, and if I'm remembering correctly that has them slightly above the block below them.

Thank you for the response, I found out about that some time after raising my question.
Sorry for the trouble and once again thanks for pointing that out, I hope it will help someone in the future with similar issue :D

  • Like 1
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.