Greenhouse not registering

[HaleyA]

Hi! I have made many greenhouses and have never had an issue with them working. I built one into an already existing hole in a mountain and no matter what I did it would not give the greenhouse buffer. So I built a super basic 5x5 out of dirt with glass on the top and it is still not registering as a greenhouse. I am using slabs of glass but the flat sides are oriented inward. I am wondering if maybe it is a mod I have installed that could be messing it up? I am using the 1.22 version. Thanks

[LadyWYT]

Welcome to the forums! Sometimes it takes greenhouses a few moments to update properly. You could also try moving the glass slabs to the upper half of the block instead of the lower, and see if that changes anything. It's been a while since I've built a greenhouse so I don't recall if the slabs need to be flush with the inside or outside.

1 hour ago, HaleyA said:

I am wondering if maybe it is a mod I have installed that could be messing it up? I am using the 1.22 version.

Possibly. If you have a mod that affects greenhouses, that would be a prime suspect. If you think it might be a mod issue, the easiest way to figure it out is to disable your mods and test on a fresh world to see if vanilla works correctly. Once you've verified vanilla is working as intended, you can re-enable mods one by one and test as you do so to see when the issue reappears. Also check to make sure that all your mods are updated for 1.22; older mods do sometimes work on newer game versions, but 1.22 changed some things in the code so a lot of older mods won't function properly without an update.

[Vexxvididu]

the glass panes for your ceiling need to be placed at the top of the blocks.

[HaleyA]

I tried both ways. Then did whole blocks of glass and now it looks like it is working but not showing me the +5 degrees greenhouse buffer... I think it must be a mod messing something up. Thank you for the replies!