Teque Posted September 29, 2021 Report Share Posted September 29, 2021 (edited) I have the seal option, but nothing happens when I hit the button. The barrel has 64 rot in it. Thank you. Edited September 30, 2021 by Teque added picture Link to comment Share on other sites More sharing options...
Saricane Posted September 29, 2021 Report Share Posted September 29, 2021 May be a little screenshot of the barrel with its input slot visible could help ? Link to comment Share on other sites More sharing options...
Omega Haxors Posted September 29, 2021 Report Share Posted September 29, 2021 Might have a tiny bit of fluid in there. Link to comment Share on other sites More sharing options...
Solution Onsdag Posted September 30, 2021 Solution Report Share Posted September 30, 2021 Try removing the rot from the input slot. It looks like you filled up the barrel, saw that the input slot was still empty, and so tried adding another stack of 64. When you add rot into a barrel it will automatically disappear from the input slot and fill up that blueish-grey bar instead. Once the grey bar is filled up you can seal the barrel. Adding more rot to the barrel, as you have done (stack of 64 in the input slot), is not necessary and will show up as 2 stacks of 64 in the output section. See attached image. 4 Link to comment Share on other sites More sharing options...
Teque Posted October 1, 2021 Author Report Share Posted October 1, 2021 Thank you so very much.. that was the trouble indeed! 1 Link to comment Share on other sites More sharing options...
Recommended Posts