Stew Posted April 26, 2020 Report Posted April 26, 2020 I'm not sure if it is the correct topic for my problem: I would like to deactivate the "wheel" in the middle by a command. I do not now if it is the temporal stability. I tried this commands: Quote /worldconfig temporalStorms [off|veryrare|rare|somtimes|often|veryoften] How frequent temporal storms should be (default: sometimes) /worldconfig temporalStability [false|true] Whether or not the temporal stability mechanic should apply (default: true)
Stew Posted April 26, 2020 Author Report Posted April 26, 2020 Okay i solved the problem: I entered both commands and after closing the savegame and loading it again it worked! 1
Jdwarfer C Posted March 9, 2021 Report Posted March 9, 2021 Hey, I used the command to disable temporal stability, so it worked but the creatures are still flickering. Is there a way to fix that?
Streetwind Posted March 9, 2021 Report Posted March 9, 2021 Maybe you could renable it for a moment, switch to creative, fly to a stable zone, wait for the wheel to fill up, and then deactivate it. 1
Jdwarfer C Posted March 9, 2021 Report Posted March 9, 2021 Sounds like a good idea, Thanks. Otherwise I can restart a new game, I didn't do so much. 1
Kolyenka Posted June 14, 2021 Report Posted June 14, 2021 (edited) On 3/9/2021 at 2:59 AM, Streetwind said: Maybe you could renable it for a moment, switch to creative, fly to a stable zone, wait for the wheel to fill up, and then deactivate it. had the same problem--this fixed it for me, but you gotta turn it back off AND restart the game before you come back down--just turning temporal instability off again is not enough, and the second you get within range of the temporal instability it'll start going back down again and will continue to do so until you restart the game. Edited June 14, 2021 by goaliemagics typo
Mikel Monleón Posted July 27, 2022 Report Posted July 27, 2022 Im having an issue where I can't turn the temporal stability back on. I turned it off successfully, but when I type in the command and write [true] it'll tell me that it was set to false. Any tips?
Philtre Posted July 28, 2022 Report Posted July 28, 2022 19 hours ago, Mikel Monleón said: Im having an issue where I can't turn the temporal stability back on. I turned it off successfully, but when I type in the command and write [true] it'll tell me that it was set to false. Make sure you aren't including the brackets around the word true. The command should look like this: /worldconfig temporalStability true 1
Recommended Posts