T-sar Posted June 16, 2025 Report Posted June 16, 2025 I've been trying to place these Rollers for a sailboat but I can't seem to find a valid location. What am I doing wrong? The blue part is in the water, I thought maybe the slabs for my docks might be an issue if it requires full blocks under it so I tried on land and got the same thing. The areas are clear and nothing is blocking the construction area.
idiomcritter Posted June 20, 2025 Report Posted June 20, 2025 (edited) welcome to the forum @T-sar can't tell from the snapshots, is the area 3 x 8 no holes or slabs for the ground bit, and 3x3 water bit? Edited June 20, 2025 by idiomcritter
Dilan Rona Posted June 20, 2025 Report Posted June 20, 2025 I've found it easier to place it from behind. Try that. Also what was said above. 1
Maelstrom Posted June 20, 2025 Report Posted June 20, 2025 10 hours ago, Dilan Rona said: I've found it easier to place it from behind. Try that. Also what was said above. I've had similar experience.
T-sar Posted June 21, 2025 Author Report Posted June 21, 2025 The areas were 3x8, with no holes, 3x3 blue area in the water, the first screenshot was slabs and the second wasn't. I ended up just spam clicking near the water in a different location and it eventually worked. Once I finish the first boat i'll try again - placing from behind. Thanks for the advice.
CosmicHomie Posted September 21, 2025 Report Posted September 21, 2025 On 6/20/2025 at 9:09 PM, T-sar said: finish The issue I've found and that you have in the first screenshot is that you can't place the boat rollers on slabs, since they don't count as a full block
Recommended Posts