Jump to content

Greenhouse not working?


Go to solution Solved by Charles Tang,

Recommended Posts

Posted

Hi I'm new to this game, half way through my first winter, trying to set up a greenhouse on a lake for the coming farming season, but the 5 degree buff is not showing.

The walls are pine planks, 3 high 7 long without corners, the 7X7 farmland is surrounded by water, and is supported by a layer of dirt blocks. The ceiling is 7X7 lower glass slabs with no obstruction to sunlight. Only one pine door as the entrance.

What am I missing?

image.thumb.png.ebbf832786f195254509d532b74d6c58.png

Posted

Allow up to ten minutes for the farmland to realize that it is in a greenhouse. If there still isn't anything happening after that, we can look at the construction.

You can make do with a lot less water, by the way. Water irrigates all eight blocks surrounding it equally, even diagonally.

Posted

True, it's the agonizing scream from the few blocks with 50% moisture I just couldn't stand. 

Checked again, still nothing. Used /roomregdebug hi, the main building has a green box, but the greenhouse either fully inside a red box, partially, or not at all. While having no buff, and with a room icon showing from the status HUD mod.

  • Solution
Posted

I'm using a solid pine door. 

Somehow it worked now.

Changed the glass slabs to full glass block, didn't help. 

Extended the 7x7 dirt platform under the farm land to 9x9 to cover the wall under the water block, didn't help.

Further extending the platform out and up 1 block, so the outer facing sides of the water block are all covered. Suddenly, greenhouse.

In short, don't build greenhouse on a lake, just build it on land like a normal person would.

Posted

That's the important bit. Farmland is not quite a full block high, as you can see from your first pic. In order to be an enclosed space, you have to put a row of full blocks around the outside of the greenhouse the same elevation as the farmland.

That means if you put water under the walls, you can't share walls in adjacent greenhouses. At least I've never been able to get that to work. I've always had to put something like an enclosed breezeway between two greenhouses built with water under the wall.

  • 1 year later...
Posted

My greenhouse wasn't sealing because of *one* cat tail growing in a block of water next to the building.   
I actually went so far as to build a "mini" 3x3 greenhouse to make sure it wasn't the doors or glass slab placements.  When that worked,  I ran the perimeter and found the one cat tail on the back of the building.

Remember, glass slabs go in the lower portion of the blocks over your green house.  You place them this way by looking at the very bottom of side edge of the block before clicking.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.