Minnigin Posted December 7, 2020 Report Posted December 7, 2020 (edited) can confirm the scaffolding issue, chisel copying works fine. version 1.14 Edited December 7, 2020 by Minnigin
Rhonen Posted December 7, 2020 Author Report Posted December 7, 2020 will check it out later after work
Rhonen Posted December 7, 2020 Author Report Posted December 7, 2020 for me its working as expected. recipe ingredients ingame workbench 1.2.3 with VS 1.14.0 stable candidate. could be a reason of patch 1.2.3 of the mod, to bring the correct order. i will improve the manuals text.
Rhonen Posted December 7, 2020 Author Report Posted December 7, 2020 Released: Version 1.2.4 Tested with stable 1.14.0 Notes see first post
Bat_Tech419 Posted December 8, 2020 Report Posted December 8, 2020 (edited) It does not. let me try it the way you have in the picture. It does work just fine the way you have it shown in picture but not when the knife and sticks are swapped per video on how to use ext. workbench. thank you so much for updated us and getting to my message. works fine now. Edited December 8, 2020 by Mikul Lewis
Rhonen Posted December 8, 2020 Author Report Posted December 8, 2020 6 hours ago, Mikul Lewis said: are swapped per video on how to use ext. workbench that tutorial video is older ... sorry. sometimes handling changes so there was a bug for unlimited crafting and identifiyng the recipes. that got fixed in 1.1.0 (mid october) and the tutorial video from Julius is created in september. that's why i changed the description in the manuals and give a hint that the ordering is important.
Mille Posted December 13, 2020 Report Posted December 13, 2020 Hallo RHONEN dieser Mod war schon mit 1.13 SUPER TOLL aber mit 1.14 sieht die Workbench HAMMER AUS Tolle ARBEIT
Rhonen Posted December 13, 2020 Author Report Posted December 13, 2020 Vielen Dank für das Lob. Das Lob für das Modell geb ich weiter - ist mir für die Mod zur Verfügung gestellt wurden
Rhonen Posted December 28, 2020 Author Report Posted December 28, 2020 Released: Version 1.2.5 added ru locale
Rhonen Posted December 31, 2020 Author Report Posted December 31, 2020 Released: Version 1.2.6 notes see first post
Rhonen Posted January 2, 2021 Author Report Posted January 2, 2021 did a re-upload, for some code-toughness
Craig Berg Posted January 5, 2021 Report Posted January 5, 2021 could i possibly suggest a recipe for swapping the chiseling applied to one material in a chiseled item for another, for instance i am chiseling sandstone cobble pillars, it would be great to be able to change the sandstone in them for granite, if you could add the recipe id like to suggest putting the chisel in the very centre of the crafting grid with the piece you want to change materials for above it and to the left of the chisel the material in the crafted item wishing to replace and then on the right the material you want to place instead. if this is possible it would make alot of things way easier and quicker
Craig Berg Posted January 5, 2021 Report Posted January 5, 2021 id also like to suggest a way to hook the workbench to automation like the quern or even perhaps a crafted piece like a crank that goes on the side of it allowing for the hookup 1
Rhonen Posted January 5, 2021 Author Report Posted January 5, 2021 (edited) Thanks for your suggestions 1 hour ago, Craig Berg said: it would be great to be able to change the sandstone in them for granite i am not sure, if this swapping is possible. 1 hour ago, Craig Berg said: id also like to suggest a way to hook the workbench to automation you are not the first one, who is whishing this. but i decided against automation, cause this "copy" function is a big time-saver, if you have a complex chiselled block. may be there will be some other automation possible. but for now this table will not get automation. Edited January 5, 2021 by Rhonen
Craig Berg Posted January 9, 2021 Report Posted January 9, 2021 i do know that its should be possible as we had a recent error item ids being replaced with others and the chiseling applied to them, not sure how its possible but would definitely be a feature that would benefit everyone who chisels greatly, as for the automation i understand why automation might be too op
Rhonen Posted January 9, 2021 Author Report Posted January 9, 2021 5 hours ago, Craig Berg said: i do know that its should be possible as we had a recent error item ids being replaced with others and the chiseling applied to them i do not say, that it's not possible it's less an ID change then an material change. but i don't know how this can be done for now. Currently i am working on some small ideas. when they finished, i will take a look on that.
Craig Berg Posted January 9, 2021 Report Posted January 9, 2021 awesome me and im sure many others are excited to read that, keep up the awesome work on a great mod
Rhonen Posted January 10, 2021 Author Report Posted January 10, 2021 19 hours ago, Craig Berg said: awesome me and im sure many others are excited to read that i believe that too. 19 hours ago, Craig Berg said: keep up the awesome work on a great mod thanks
1nFected_f0x Posted January 13, 2021 Report Posted January 13, 2021 Hallo Rhonen, die werkbank funktioniert bei mir irgendwie nicht. es liegt ein gemeißelter Stamm (liegend) drin, dann der Meißel selber und ganz rechts ein unbearbeiteter Holzblock. Aber leider wird der Block nicht kopiert. Anwenderfehler oder gehen bis jetzt nur stehende Blöcke zu kopieren? V1.2.6 Danke
Rhonen Posted January 13, 2021 Author Report Posted January 13, 2021 (edited) hmm, zuletzt ging es noch, hatte ja extra die Untersützung von den 'horizontal Orientation ' eingebaut mit 1.1.0. Welche Holzart geht nicht? Kann ich heut abend nachschauen. Quote es liegt ein gemeißelter Stamm (liegend) drin, dann der Meißel selber und ganz rechts ein unbearbeiteter Holzblock. Aber leider wird der Block nicht kopiert. Kannst du vieleicht noch nen Screenshot reinpacken, was angezeigt wird? Edited January 13, 2021 by Rhonen
1nFected_f0x Posted January 13, 2021 Report Posted January 13, 2021 Ich habe es mit Ahorn versucht. der Feil, welcher sich grün füllen müsste, bleibt leer (ist durch den infoblock verdeckt) ja keine Eile.
Rhonen Posted January 13, 2021 Author Report Posted January 13, 2021 (edited) das wichtigste steht da aber. Er hat erkannt, das alles da ist => Text: Gemeißelten Block kopieren. Ist der Mauszeiger auf der Werkbank, während du den Rechts-Klick hälst? Edited January 13, 2021 by Rhonen
1nFected_f0x Posted January 13, 2021 Report Posted January 13, 2021 OK also doch Anwender Fehler. Ach ich muss dir rechte Maustaste gedrückt lassen . Ich dachte ich lege alles rein und kann das fertige Teil nach einiger Zeit abholen Zu 99% sitzt das Problem vor dem Problem. Ich probier es heute Abend nochmal. Danke für deine Mühe
Rhonen Posted January 13, 2021 Author Report Posted January 13, 2021 29 minutes ago, 1nFected_f0x said: Ach ich muss dir rechte Maustaste gedrückt lassen . Ich dachte ich lege alles rein und kann das fertige Teil nach einiger Zeit abholen Haha Nein, es ist interaktiv gestaltet, da es schon eine erhebliche Erleichterung ist, komplex-gemeißelte Blöcke einfach zu kopieren. Freut mich, wenn es soweit erklärt, was schief ging.
Recommended Posts